Appendix 3.2 I/O Signals - Mitsubishi Electric QJ71DN91 User Manual

APPENDIXES

Appendix 3.2 I/O signals

Model
Signal
X01
X06
X07
X08
Input signal
X0A
X0B
X0C
X14
X15
Y11
Y15
Output signal
Y17
Y18
App - 3
The following table lists differences in I/O signals between the QJ71DN91 and the
AJ71DN91/A1SJ71DN91.
QJ71DN91
I/O Communicating
Saving Parameters to Flash ROM
Parameters Saved to Flash ROM
Error Set Signal for Slave Function
H/W Test in Progress
H/W Test Completion
H/W Test Error Detection
Auto-Configuring
Auto Configuration Completion
I/O Communication Request
Auto Configuration Request
Request for Saving Parameters to
Flash ROM
Error Reset Request for Slave
Function
AJ71DN91/A1SJ71DN91
Refreshing
The module operation using this I/O
Parameter being set
signal differs. (Refer to (1) in this
Parameter setting
section.)
complete
This signal is used for the function
Use prohibited
added to the QJ71DN91.
The module operation using this I/O
Refresh request signal differs. (Refer to (1) in this
section.)
This signal is used for the function
Use prohibited
added to the QJ71DN91.
The module operation using this I/O
Parameter set request signal differs. (Refer to (1) in this
section.)
This signal is used for the function
Use prohibited
added to the QJ71DN91.
MELSEC-Q
Precautions when replacing the
AJ71DN91/A1SJ71DN91 with the
QJ71DN91
App - 3