Execution Error Codes Of Message Communication (For The Master Function Only) - Mitsubishi Electric QJ71DN91 User Manual

10 TROUBLESHOOTING

10.2.2 Execution error codes of message communication (for the master function only)

Error
Detected
code
in:
(Dec.)
161 QJ71DN91 The specified slave node No. is other than 0 to 63.
Error
Detected
code
in:
(Dec.)
Resources required for the object to execute a
2 Slave node
requested service could not be used.
The requested service was not installed, or it was
8 Slave node
not defined for this object class/instance.
9 Slave node Invalid attribute data were detected.
The object is already placed in the mode/status that
11 Slave node
is requested by the service.
The object cannot execute the requested service in
12 Slave node
the current mode/status.
A request to change an attribute whose change is
14 Slave node
inhibited was received.
15 Slave node Permission/privilege check failed.
10 - 13
An execution error code is stored in Message Communication Result (address: 0121
Read it when Message Communication Completion signal (X02) is set to on, and
check the error details.
(1) When reading communication error information
Description
(2) When getting/setting attribute, or resetting
Description
Action
• Specify a slave node No. within the range of 0 to 63.
Action
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Verify the current status by reading the attribute.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Verify the current status by reading the attribute.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
• Check whether or not the specified MAC ID, class ID,
instance ID and attribute ID are correct.
• Referring to the slave node manual, check the
condition under which the slave node notifies this
error, and take an appropriate action.
MELSEC-Q
).
H
10 - 13