Mitsubishi Electric QJ71DN91 User Manual page 62

3 SPECIFICATIONS
Buffer memory
address (Hex.)
01DE
H
1st slave
node
01DF
H
01E0 to
H
Settings for 2nd to 63rd slave nodes
03CF
H
*1: When setting a value of 32768 or more, set it in hexadecimal.
3 - 32
Item
Watchdog timeout action
Production inhibit time
POINT
When changing master function parameters, set default values for the areas after
the changed area.
(Example) When changing the number of slave nodes that perform I/O
communication, set default values in the areas for the 5th and 6th slave
nodes.
Set an action for watchdog timeout of the slave node.
0000 : Equivalent to the following Timeout (Default)
H
0001 : Timeout
H
The connection is placed in timeout status.
Not recovered until an operator stops the communication and
then resumes it.
0002 : Auto Delete
H
The connection is automatically deleted. At this time the
communication stops once, and then resumes automatically.
The output is cleared once.
0003 : Auto Reset
H
The communication continues while the connection is maintained.
The output is not cleared.
Set a production inhibit time.
Setting varies depending on the connection type. For details, refer to Table
3.25. (Setting range: 0 to 65535ms (FFFF
0000 : 10ms (Default)
H
Other than 0000 : Set value –1 (ms)
H
Same as those for 1st slave node
MELSEC-Q
Description
*1
))
H
3 - 32