Table of Contents
Advertisement
7 PROGRAMMING FOR EXECUTING THE MASTER FUNCTION
7 - 11
(b)
[1. Stop I/O Communication.]
Clicking the I/O Comm. Stop button on the [Monitor/Test] screen will
display the [1. Stop I/O Communication.] screen.
Follow the setting instructions.
1)
When the current value for "Y11: I/O Communication Request" is "I/O
Comm. Request", set "I/O Comm. Stop Request".
Select "I/O Comm. Stop Request"
2)
When the current value for "X01: I/O Communicating" is "I/O
Communicating", set "I/O Comm. Request" for "Y11: I/O
Communication Request".
Select "I/O Comm. Request"
Then, set "I/O Comm. Stop Request" for "Y11: I/O Communication
Request".
Select "I/O Comm. Stop Request"
Check that the current value for "X01: I/O Communicating" was
changed to "I/O Comm. Stop".
MELSEC-Q
Execute test button
Execute test button
Execute test button
1)
2)
3)
4)
7 - 11
Advertisement
Table of Contents
Troubleshooting
