Table of Contents
Advertisement
12.7
Removing the fork protector
12.8
Installing the fork protector
12.9
Removing the lower triple clamp
12 SERVICE WORK ON THE CHASSIS
–
Remove screws
–
Remove screws
–
Remove screws
V00903-10
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position the fork protector on the right fork leg. Mount and
V00903-11
tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
Main work
–
Remove screw
–
Remove screw
–
Open cable holder
the clutch line.
–
Open cable holder
the wiring harness.
–
Remove the upper triple clamp with the handlebar and set
aside.
V00932-10
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
1
.
M6
10 Nm (7.4 lbf ft)
2
.
3
.
M6
10 Nm (7.4 lbf ft)
p. 56)
(
p. 101)
(
p. 57)
p. 64)
1
.
2
.
3
in front of the left radiator and detach
4
in front of the right radiator and detach
p. 113)
59
Advertisement
Table of Contents
