Adding 2-Stroke Oil - Husqvarna TE 250i Owner's Manual

9 RIDING INSTRUCTIONS
9.9
42
401226-10

Adding 2-stroke oil

Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
M01518-10
–
Fill the fuel tank with fuel up to level
Guideline
A
Level
Total fuel tank
capacity, approx.
Info
Do not refuel using pre-mixed fuel.
–
Close the filler cap. ( p. 21)
–
Open 2-stroke oil tank cap. (
–
Fill the 2-stroke oil tank up to the lower edge
neck.
2-stroke oil tank
content approx.
–
Close 2-stroke oil tank cap. (
A
.
35 mm (1.38 in)
9 l Super unleaded
(2.4 US gal) (ROZ 95/RON
95/PON 91)
( p. 153)
p. 21)
A
of the filler
0.7 l (0.7 qt.) Engine oil, 2-stroke
( p. 152)
p. 21)