Table of Contents
Advertisement
15.8
Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
–
Position the headlight mask and secure it with rubber
2
bands
.
The holding lugs engage.
V00958-11
–
Position brake line
line guide.
V00957-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
socket counterclockwise all the way and remove it.
–
Pull bulb socket
F00343-10
15 ELECTRICAL SYSTEM
3
4
and wiring harness
p. 117)
1
together with the underlying bulb
2
of the parking light out of the reflector.
in the brake
p. 113)
115
Advertisement
Table of Contents
