Preparing Vehicle For Rides On Dry Sand - Husqvarna TE 250i Owner's Manual

8.5

Preparing vehicle for rides on dry sand

–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
V00899-01
–
Change the radiator cap.
–
Mount a dust cover on the air filter.
Dust cover for air filter (79006920000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
M01104-01
–
Mount a sand cover on the air filter.
Sand cover for air filter (79006922000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
M01105-01
8 PREPARING FOR USE
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
33