15 ELECTRICAL SYSTEM
15.5
112
Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
R02958-10
V00970-10
Preparatory work
(All EU models)
–
Press and hold the kill switch
until the engine stops.
(TE 250i US)
–
Press and hold the kill switch
until the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. (
p. 68)
Main work
–
1
Pull the EFI control unit
hang to the side.
–
Open fuse box cover
2
–
Remove the defective fuse.
Guideline
(All EU models)
Fuse 1 - 10 A - EFI control unit, lambda sensor, oil
pump, combination instrument, fuel injection, diagnos-
tics connector
Fuse 2 - 10 A - horn, brake light, radiator fan (optional),
turn signal (optional)
Fuse 3 - 10 A - high beam, low beam, parking light, tail
light, license plate lamp
Fuse 4 - 5 A - fuel pump
(TE 250i US)
Fuse 1 - 10 A - EFI control unit, oil pump, combination
instrument, fuel injection, diagnostics connector
Fuse 2 - 10 A - radiator fan (optional)
Fuse 3 - 10 A - low beam, parking light, tail light
Fuse 4 - 5 A - fuel pump
Fuses res - 10 A - spare fuse
Info
You can recognize a faulty fuse by a burned-out fuse
A
wire
.
while the engine is idling
while the engine is idling
p. 69)
upward off the rubber plugs and
.