Changing The Fuses Of Individual Electrical Power Consumers - Husqvarna FE 501s 2022 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
110
S03588-10
S03589-10

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
S03587-10
Main work
–
1
Pull starter relay from the holder.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
4
A spare fuse is located in the starter relay.
–
Insert a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 66)
Main work
–
1
Open fuse box cover
–
Remove the faulty fuse.
2
.
3
.
A
.
p. 144)
p. 68)
p. 68)
.