Changing The Fuses Of Individual Electrical Power Consumers - Husqvarna 701 Supermoto 2023 Owner's Manual

15 ELECTRICAL SYSTEM
15.6
88

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
F00575-10
F00576-10
Preparatory work
–
Remove the seat. ( p. 52)
Main work
–
1
Open fuse box cover
–
Remove the faulty fuse.
Guideline
Fuse 1 - 10 A - ignition
Fuse 2 - 10 A - ignition, combination instrument, engine
control unit lambda sensor, ABS button
Fuse 3 - 10 A - fuel pump
Fuse 4 - 10 A - radiator fan
Fuse 5 - 10 A - horn, brake light, turn signal, oil pressure
sensor
Fuse 6 - 15 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse 7 - 10 A - for auxiliary equipment (permanent positive)
Fuse 8 - 10 A - for auxiliary equipment (ignition plus)
Fuse 9 - 10 A - ABS control unit, diagnostics connector
Fuse 10 - not assigned
Fuse SPARE - 10 A/15 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088015) (
.
A
.
p. 121)
p. 121)