Changing The Fuses Of Individual Electrical Power Consumers - Husqvarna Svartpilen 250 2022 Owner's Manual

15.6

Changing the fuses of individual electrical power consumers

Info
The fuse box containing the fuses of individual electrical power consumers is located under the seat.
Finishing work
–
Mount the front rider's seat. (
–
Mount the passenger seat. (
Preparatory work
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
Main work
–
Open fuse box cover
–
Remove the faulty fuse.
Guideline
Fuse 1 - not assigned
Fuse 2 - 10 A - combination instrument
Fuse 3 - 10 A - power relay
Fuse 4 - 15 A - ignition coil, start auxiliary relay, horn, fuel
pump
Fuse 5 - 10 A - radiator fan
Fuse 6 - 15 A - brake light, turn signal, high beam, low
beam, position light, tail light, license plate lamp
Fuse 7 - 10 A - ABS control unit, combination instrument,
diagnostics connector
Fuse 8 - 10 A - emergency off
Fuse 9 - 10 A - permanent positive for auxiliary equipment
(ACC1 front)
Fuse 10 - 10 A - ignition positive for auxiliary equipment
F03843-10
(ACC2 front, ACC2 rear)
Fuse SPARE - 10 A/15 A/30 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
Warning
Fire hazard Incorrect fuses overload the electrical
system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) (
Fuse (75011088015) (
Fuse (75011088030) (
ELECTRICAL SYSTEM 15
p. 55)
p. 54)
p. 54)
p. 55)
1
.
A
p. 117)
p. 117)
p. 117)
.
91