Changing The Fuses Of Individual Power Consumers - Husqvarna FE 350 EU 2020 Owner's Manual

15.5

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
S03589-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. (
Main work
–
Open fuse box cover
–
Remove faulty fuse.
Guideline
(EU)
Fuse 1 ‑ 10 A - EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector
(US)
S03587-10
Fuse 1 ‑ 10 A - EFI control unit, combination instru-
ment, combination switch (optional), electronic fuel
injection, diagnostics connector, evaporate emission
control valve
ELECTRICAL SYSTEM 15
2
.
3
.
A
4
is located in the starter relay.
p. 148)
p. 67)
p. 68)
while the engine is
p. 68)
p. 66)
1
.
.
113