Changing The Fuses Of Individual Power Consumers - Husqvarna FE 450 EU 2020 Owner's Manual

15 ELECTRICAL SYSTEM
15.5
114
S03589-10

Changing the fuses of individual power consumers

Info
The fuse box containing the fuses of individual power consumers is located under the seat.
S03587-10
–
Take off protection caps
–
Remove faulty main fuse
Info
A faulty fuse has a burned-out fuse wire
4
A spare fuse is located in the starter relay.
–
Install a new main fuse.
Fuse (58011109120) (
–
Check that the electrical system is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
Finishing work
–
Mount the seat. ( p. 68)
–
Install the air filter box cover. (
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 67)
Main work
–
1
Open fuse box cover
–
Remove faulty fuse.
Guideline
(All EU models)
Fuse 1 ‑ 10 A - EFI control unit, lambda sensor, combi-
nation instrument, combination switch (optional), elec-
tronic fuel injection, diagnostics connector
(FE 501 US)
Fuse 1 ‑ 10 A - EFI control unit, combination instru-
ment, combination switch (optional), electronic fuel
injection, diagnostics connector, evaporate emission
control valve
2
.
3
.
A
.
p. 149)
p. 69)
while the engine is
p. 69)
.