Handlebar Position; Adjusting The Handlebar Position - Husqvarna TC 250 Owner's Manual

10.16

Handlebar position

10.17

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
–
Remove protection cap
–
Turn adjusting screw
Info
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
M01100-10
Guideline
Rebound damping (TC 250)
Comfort
Standard
Sport
Rebound damping (TX 300)
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counter-
clockwise to reduce damping.
–
Mount protection cap
The holes on the handlebar supports are placed at a distance
A
of from the center.
Hole distance A
The handlebar can be mounted in 2 different positions. In this
way, the handlebar can be mounted in the most comfortable
position for the rider.
H01188-10
Preparatory work
–
Remove the handlebar cushion.
10 TUNING THE CHASSIS
1
.
2
clockwise all the way.
2
is located at the lower end of the
17 clicks
12 clicks
7 clicks
17 clicks
12 clicks
7 clicks
1
.
3.5 mm (0.138 in)
51