Installing The Lower Triple Clamp - Husqvarna TC 250 Owner's Manual

11.10

Installing the lower triple clamp

11 SERVICE WORK ON THE CHASSIS
Main work
–
Take off cable holder
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Protect the components against damage by covering
V00887-10
them.
Do not bend the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
H01528-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
the upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
102146-10
1
in front of the left radiator.
2 .
3 .
4
. Remove protective ring
p. 155)
1
2 3
and O-ring .
5
.
is correctly posi-
57