Installing The Shock Absorber - Husqvarna TC 250 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.19
64
H01540-01
H01541-10
H01542-10

Installing the shock absorber

H01543-10
H01544-10
–
Remove the connecting link of the chain.
–
Take off the chain.
–
8
Remove nut and pull out the swingarm pivot.
–
Push the swingarm back and secure it against falling over.
–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
Main work
–
Carefully position the shock absorber into the vehicle from
the bottom.
–
Mount and tighten screw
Guideline
Screw, top M10
shock absorber
–
Position the swingarm and mount the swingarm pivot.
Info
Pay attention to flat area
–
2
Mount and tighten nut
Guideline
Nut, swingarm pivot
9
.
1 .
60 Nm (44.3 lbf ft)
®
Loctite
A
.
.
M16x1.5 100 Nm (73.8 lbf ft)
2701™