Wheels, Tires; Removing The Front Wheel - Husqvarna TC 250 Owner's Manual

13.1

Removing the front wheel

Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
(Option: Brembo)
–
Press the brake caliper onto the brake disc by hand in
order to push back the brake pistons.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
F00066-10
(Option: Magura)
–
Press the brake caliper onto the brake disc by hand in
order to push back the brake pistons.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
H02363-12
–
Loosen screw
–
Loosen screws
–
Press on screw
clamp.
–
Remove screw
H02371-10
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Holding the front wheel, withdraw the wheel spindle. Take the
front wheel out of the fork.
H02372-10
Info
Do not pull the hand brake lever when the front wheel
is removed.

13 WHEELS, TIRES

p. 53)
1
by several rotations.
2
.
1 to push the wheel spindle out of the axle
1
.
103