Standards - Husqvarna TC 250 Owner's Manual

24 STANDARDS

JASO T903 MA
Different technical development directions required a separate specification for motorcycles – the
JASO T903 MA standard.
Earlier, engine oils from the automobile industry were used for motorcycles because there was no separate
motorcycle specification.
Whereas long service intervals are demanded for automobile engines, the focus for motorcycle engines is on
high performance at high engine speeds.
In most motorcycle engines, the transmission and clutch are lubricated with the same oil.
The JASO MA standard meets these special requirements.
SAE
The SAE viscosity classes were defined by the Society of Automotive Engineers and are used for classifying
oils according to their viscosity. The viscosity describes only one property of oil and says nothing about quality.
JASO FD
JASO FD is a classification for a 2-stroke engine oil that was specifically developed for the extreme demands
of racing. Thanks to first rate synthetic esters and specially designed additives, superb combustion is achieved
even under extreme operating conditions.
156