Running In The Engine - Husqvarna TC 250 Owner's Manual

Info
The delivery certificate and the Service and Warranty Booklet are regarded as evidence of warranty
services.
–
Before your first trip, read the entire Owner's Manual carefully.
–
Get to know the controls.
–
Adjust the basic position of the clutch lever. (
–
Adjust the basic position of the hand brake lever. (
–
Adjust the basic position of the foot brake lever.
–
Adjust the basic position of the shift lever.
–
Get used to handling the motorcycle on a suitable surface before undertaking a more challenging trip.
Info
Your motorcycle is not approved for use on public roads.
When off road, it is recommended that you are accompanied by another person on another vehicle
so that you can help each other.
–
Try also to ride as slowly as possible and in a standing position to get a better feeling for the motorcycle.
–
Do not make any off-road trips that exceed your ability and experience.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Do not take luggage along.
–
Do not exceed the maximum permissible weight and the maximum permissible axle loads.
Guideline
Maximum permissible overall weight
Maximum permissible front axle load
Maximum permissible rear axle load
–
Check the spoke tension. (
Info
The spoke tension must be checked after half an hour of operation.
–
Run in the engine. ( p. 25)
7.2

Running in the engine

–
During the running-in phase, do not exceed the specified engine performance.
Guideline
Maximum engine performance
During the first 3 operating hours
During the first 5 operating hours
–
Avoid fully opening the throttle!
p. 84)
p. 87)
( p. 95)
( p. 126)
335 kg (739 lb.)
145 kg (320 lb.)
190 kg (419 lb.)
p. 109)
< 70 %
< 100 %
7 PREPARING FOR USE
25