Installing The Rear Wheel - Husqvarna TC 250 Owner's Manual

13 WHEELS, TIRES
13.4
106
H02374-10
H00936-10

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
(Option: Magura)
–
Press the brake caliper onto the brake disc by hand in
order to push back the brake piston.
Info
Make sure when pushing back the brake piston
that you do not press the brake caliper against the
spokes.
–
Remove nut 1 .
–
Remove chain adjuster
enough to allow the rear wheel to be pushed forward.
–
Push the rear wheel forward as far as possible. Remove
the chain from the rear sprocket.
Info
Cover the components to protect them against
damage.
Warning
Danger of accidents Damaged brake discs
reduce the braking effect.
–
Always lay the wheel down in such a way that
the brake disc is not damaged.
–
Holding the rear wheel, withdraw the wheel spindle. Take
the rear wheel out of the swingarm.
Info
Do not operate the foot brake lever when the rear
wheel is removed.
–
4
Remove spacers .
2 . Pull out wheel spindle 3 far