Husqvarna TC 250 Owner's Manual page 67

11 SERVICE WORK ON THE CHASSIS
–
Mount the chain.
–
Connect the chain with the connecting link.
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
K00949-10
(Option: Brembo)
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
H01545-10
(Option: Magura)
–
Position the foot brake cylinder.
Push rod
The dust boot is correctly positioned.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
A00064-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever to
angle lever
Info
Pay attention to flat area
H01546-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
3
engages in the foot brake cylinder.
4 .
M6 10 Nm (7.4 lbf ft)
3
engages in the foot brake cylinder.
4
.
M6 10 Nm (7.4 lbf ft)
5
.
M14x1.5 80 Nm (59 lbf ft)
B
.
6
.
M10 60 Nm (44.3 lbf ft)
Loctite
®
2701™
65