Husqvarna TC 250 Owner's Manual page 94

12 BRAKE SYSTEM
92
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
K00533-10
F00064-10
100397-01
(Option: Brembo)
–
Move the brake fluid reservoir mounted on the handlebar
to a horizontal position.
–
1
Remove screws .
–
2
Remove cover with membrane
–
Manually press the brake caliper toward the brake disc
to push back the brake pistons. Ensure that brake fluid
does not flow out of the brake fluid reservoir, if necessary
extract excess.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
–
4
Remove cotter pins
brake linings.
–
Clean the brake caliper and brake caliper support.
–
Check that leaf spring
7
plate in the brake caliper support are seated correctly.
3
.
5
, pull out pin , and remove the
6
in the brake caliper and sliding