Removing The Right Side Cover - Husqvarna TC 250 Owner's Manual

11.31

Removing the right side cover

11 SERVICE WORK ON THE CHASSIS
Main work
–
Remove screws
–
Remove the glass fiber yarn filling
–
Clean the parts that need to be reinstalled and check for
damage.
–
Fit the new glass fiber yarn filling
–
Slide outer tube
fiber yarn filling.
–
Mount and tighten all screws
Guideline
Screws on the main
silencer
H01759-10
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
(TC 250)
–
Remove screw
–
Pull off the side cover sideways in areas
remove toward the front.
K00904-10
(TX 300)
–
Remove screw
–
Pull off the side cover sideways in areas
remove toward the front.
K00906-10
1 2
. Pull out inner tube .
3 from the inner tube.
3
into the inner tube.
4
over the inner tube with the new glass
1
.
M5 7 Nm (5.2 lbf ft)
p. 72)
p. 74)
1 .
A
1
.
A
and B , and
B
and , and
73