Tuning The Engine; Checking The Play In The Throttle Cable; Adjusting The Play In The Throttle Cable - Husqvarna TC 250 Owner's Manual

16 TUNING THE ENGINE

16.1
16.2
120

Checking the play in the throttle cable

400192-11

Adjusting the play in the throttle cable

K00895-10
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Move the
throttle grip back and forth slightly to determine the play in
A
throttle cable .
Play in throttle cable
» If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
–
Start the engine and let it run idle. Move the handlebar to and
fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust the play in the throttle cable.
Preparatory work
(TC 250)
–
Turn the tap handle of the fuel tap to the OFF position.
(TX 300)
–
Turn the tap handle of the fuel tap to the OFF position.
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 66)
–
Remove the right side cover. (
–
Remove the fuel tank.
–
Check the throttle cable routing. (
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve .
–
Ensure that the throttle cable sleeve is pushed all the way
2
into barrel adjuster .
–
3
Loosen nut .
2 ... 3 mm (0.08 ... 0.12 in)
( p. 120)
( p. 120)
p. 68)
p. 73)
( p. 75)
p. 82)