Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand - Husqvarna TC 250 Owner's Manual

11.1

Raising the motorcycle with a lift stand

Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
11.2

Removing the motorcycle from the lift stand

Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
1 0 0 1

11 SERVICE WORK ON THE CHASSIS

–
Raise the motorcycle at the frame underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
(TC 250)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
left side of the wheel spindle.
Info
Remove the plug-in stand before riding.
402001-10
(TX 300)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
ground with your foot and lean the motorcycle on it.
Info
While riding, the side stand must be folded up and
secured with the rubber band.
401943-10
1
into the
1
to the
53