Adjusting The Rebound Damping Of The Fork; Handlebar Position; Adjusting The Handlebar Position - Husqvarna FC 250 2016 Owner's Manual

10 TUNING THE CHASSIS
10.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
10.14

Handlebar position

10.15

Adjusting the handlebar position

–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Turn red adjusting screw
Info
Adjusting screw
The rebound damping is located in right fork leg REB (red adjusting
screw). The compression damping is located in left fork leg COMP (white
adjusting screw).
–
Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
120314-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
The holes on the handlebar support are placed at a distance of
Hole distance A
The handlebar can be mounted in 2 different positions. In this way, the handlebar can
be mounted in the most comfortable position for the rider.
102144-10
Preparatory work
–
Remove the handlebar cushion.
17 clicks
15 clicks
13 clicks

all the way clockwise.

is located at the upper end of the right fork leg.
17 clicks
15 clicks
13 clicks
3.5 mm (0.138 in)
31

from the center.