Graco PCF Instructions - Parts Manual page 93

Error Type Settings Screen
This screen enables users to set the error type (alarm,
deviation, or none) that will be issued if the pressure,
flow rate, volume, or computed target goes outside the
tolerance settings of the active style. For more informa-
tion on the purpose of each error, see Jobs, page 37.
313377L
Appendix A - Advanced Display Module (ADM)
Maintenance Advisory Limits Screen
This screen enables users to set volume (or hours) limit
that will trigger a maintenance advisory for the air sup-
ply, V/P regulator, fluid regulator, flow meter, and all four
guns.
NOTE: Hours is shown instead of Volume for fluid
plates without a flow meter.
The Volume (or Hours) column displays the current
totalizer value. If this value exceeds the set limit, the
value will turn red and a maintenance advisory is issued.
See Maintenance Screen, page 97, for more informa-
tion about maintenance totalizers.
93