Replace Advanced Display Module
1. Prepare Control Center for Repair, page 74.
2. Disconnect the CAN cable (18) from the ADM (2).
21
2
18
F
. 52
IG
3. Remove the ADM by snapping it out of the mounting
bracket.
4. Insert the new ADM by snapping it into the mounting
bracket.
5. Reconnect the CAN cable to the new ADM.
313377L
Replace Advanced Display Module Bracket
1. Prepare Control Center for Repair, page 74.
2. Remove the ADM (2); follow Replace Advanced
Display Module. (Leave the CAN cable attached to
the ADM.)
3. Remove the speed clips (25) and rivets (26) from
the mounting bracket (21).
2
11, 14, 24
F
. 53
IG
4. Remove the mounting bracket from the front cover
(20) and replace with a new bracket.
5. Secure the new bracket to the front cover with
speed clips and rivets.
6. Reinstall the ADM.
26
20
21
25
Repair
75