Graco PCF Instructions - Parts Manual page 36

Operation
Dispense From Maintenance Screen
1. Navigate to Home screen 1.
F . 25
IG
2. Press to enter maintenance screen.
F . 26
IG
3. Press to open the Control Mode drop-down
list, and select the preferred control mode. Press
again to exit the drop-down list.
36
4. Press to move to the target fields. Enter the
target pressure, flow rate, and volume (dependent
on control mode) and press
5. Press to move to the gun check boxes. Press
to select the desired guns.
6. Follow Step 2 of Manually Dispense Fluid, page
36.
Manually Dispense Fluid
1. From Home screen 1 press
nance screen.
2. Press and verify that the gun opens.
3. Continue to press
or dispense material.
4. Press again to exit maintenance screen.
to save.
to enter mainte-
as long as needed to load
313377L