4.4. Internal View
Figure 4: Internal view (without cover)
1
DDR3L SO-DIMM Memory Socket (DIMM1 & DIMM2, see Chapter 4.4.1)
2
SATA Connector (SATA2, see Chapter 4.4.2)
3
Full-sized mSATA Socket (SATA1, see Chapter 4.4.3)
4
Half-sized mPCIe Socket (MPCIE1, see Chapter 4.4.4)
5
Full-sized mPCIe Socket (MPCIE2, see Chapter 4.4.4)
6
SIM Card Socket (SIM1, see Chapter 4.4.4.1)
7
mSATA fixing bolt
8
Half-sized mPCIe fixing bolt
9
Full-sized mPCIe fixing bolt
10 Hard disk bracket fixing bolt
4.4.1. DDR3L SO-DIMM Memory Socket
The KBox E-200 Series provides two 204-pin DDR3L SO-DIMM socket to install memory RAM.
4.4.2. SATA Connector
The KBox E-200 Series provided one SATA 7+15 pin connector to install a 2.5" SATA HDD / SSD. An additional bracket is
required for holding and fixing the hard disk.
www.kontron.com
9
8
1
1
7
KBox E-200 Series - User Guide, Rev. 1.0
5
4
10
10
3
2
6
// 24