System Mounting; Figure 8: Optional Vesa Mounting Kit For Kbox E-200 Series; Figure 9: Hole Pattern Of Base Mounting Bracket For Kbox E-200 Series - Kontron KBox E-200 Series User Manual

7.1. System Mounting

In order to adapt the KBox E-200 Series for mounting Kontron offers different mounting solution such as:
 KBox E-200 Series configuration with a VESA mounting kit for vertical installation into a control cabinet / custom
enclosure / machine or onto a wall / the back of a monitor
 KBox E-200 Series as desktop unit with 4 rubber feet
Depending on the ordered KBox E-200 Series configuration, your system may be supplied with a VESA mounting kit
(Figure 8). The kit consists of two parts: a base bracket (Figure 8, pos. 1) to be fixed permanently on the mounting
surface and another hooked bracket to hold the KBox E-200 Series with a hand-screw knob (Figure 8, pos. 2) to
secure two brackets.

Figure 8: Optional VESA mounting kit for KBox E-200 Series

1 Base mounting bracket
2 Hooked mounting bracket with a hand-screw knob
The base mounting bracket complies with VESA 75 and VESA 100 patterns (Figure 9). To fasten the bracket, the
control cabinet / custom enclosure / machine / monitor / wall must have VESA 75, VESA 100 or other screw pattern
shown as Figure 9 for mounting.

Figure 9: Hole pattern of base mounting bracket for KBox E-200 Series

www.kontron.com
KBox E-200 Series - User Guide, Rev. 1.0
2
1
// 33