Usb 3.0; Rs232/422/485; External Power Switch; Antenna - Kontron KBox E-200 Series User Manual

LED satatus:
Off - Link is down
Flashing Green - Link is up and active
Steady Green - Link is up, no activity

4.3.4. USB 3.0

The front I/O panel of the KBox E-200 Series provides two USB 3.0 / 2.0 interface. This connector allows connection
of USB 3.0 or USB 2.0 compatible device to the system.

4.3.5. RS232/422/485

COM 1 and COM 2 are provided as a 9-pin D-SUB connector and allow the connection of a serial peripheral. They are
designed to support RS232/422/485 serial communication which can be configured via BIOS setup.

4.3.6. External Power Switch

This connector allows integrators to locate an external power switch to power on and off the system.

4.3.7. Antenna

The KBox E-200 Series reserves three covered cutouts for the Reverse (RP) SMA connectors of two WLAN antennas
(mPCIe WLAN card with two antennas is an option) and one 3G / 4G antenna (mPCIe 3G / 4G modem card with one
antenna is an option).
www.kontron.com
KBox E-200 Series - User Guide, Rev. 1.0
LED satatus:
Orange - 1000 Mbit/s link established
Green - 100 Mbit/s link established
Off - 10 Mbit/s link established
// 23