Chapter 6 Multiple Streams Testing
Copying a stream's settings to all streams
Copying a stream's settings to all streams
190
5 If you are transmitting layer 4 streams, use the right arrow
key to go to the L4 Config per Stream menu, and then
specify the layer 4 characteristics for each stream.
For an explanation of each of the settings, see
page 170
of
"Specifying the traffic mode and
an explanation of the ATP Listen Port setting, see
standing the ATP Listen Port" on page
6 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home key to return to
the Summary Results screen.
The traffic streams are configured.
After you configure a traffic stream, you can optionally copy
the stream's settings to the remaining streams.
HST-3000 Ethernet Testing User's Guide
step 3 on
ports". For
"Under-
164.