Application; Optical Ethernet Terminate Application - JDS Uniphase hst-3000 User Manual

10/100/1G
Electrical Ethernet
terminate

application

1G Optical
Ethernet terminate
application
Figure 2 illustrates the signal path when running an electrical
terminate application.
Figure 2 Terminate application: electrical signal path
When running a terminate application for a 1G optical signal,
events on the receiving SFP port (R/T 1) are analyzed, but a
separate, independent signal is generated and transmitted by
the HST. Analysis is restricted to the R/T 1 port.
Figure 3 illustrates the signal path when running a terminate
application for a 1G optical signal.
Figure 3 Terminate application: 1G optical signal path
HST-3000 Ethernet Testing User's Guide
Chapter 1 Getting Started
Test applications
11