Turning Rdi Or Ais Analysis On - JDS Uniphase hst-3000 User Manual

Chapter 3 Ethernet Testing
OAM service and link layer testing
Turning RDI or
AIS analysis On
104
Setting
Frm Period Wndw
Frm Period Thres
Frm Second Summary Wndw
Frm Second Summary Thres
10 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home button to return
to the Main screen.
11 If you are testing link layer OAM, loop up the instrument's
peer (see "Using the automatic loopback feature" on
page 89).
The OAM settings are specified.
After you specify OAM settings, you can start traffic and
monitor the circuit for RDI or AIS. If you turn RDI or AIS anal-
ysis On, you can also insert frames with RDI or AIS into the
traffic stream.
HST-3000 Ethernet Testing User's Guide
Parameters
Specify the duration of the
window in terms of
frames.
Specify the number of
frame errors that must
occur in the window to
declare an error.
Specify the duration of the
period in terms of the
100 ms interval.
Specify the number of
frame errors that must
occur in the window to
declare an error.