Configuring The Traffic Load - JDS Uniphase hst-3000 User Manual

Configuring the
traffic load
Setting
TCP Window Size
Acterna Payload
Pattern
(appears only if a
BERT payload is
selected)
Fill Pattern
(appears only if a Fill
Pattern payload is
selected)
a. A summarized list of well known port numbers is provided in
Table 12 on page
4 If you need to specify other settings for the test, use the
left and right arrow keys to go to the appropriate configu-
ration menu; otherwise, press the Home key to return to
the Summary Results screen.
The layer 4 header settings are specified for transmitted
traffic.
Before transmitting TCP or UDP traffic, you can specify the
type of traffic load the unit will transmit (Constant, Bursty,
Ramp, or Flood) in 0.001% increments, beginning at 0.002%.
For details on configuring a traffic load, see
traffic load" on page
HST-3000 Ethernet Testing User's Guide
Parameters
Enter a window size in bytes.
The window size is used in
combination with the average
round trip delay measurement
for your test to estimate the
TCP throughput.
– BERT
– Fill Pattern
Select one of the following:
– A predefined PRBS or Fixed
pattern.
– User Defined, and then
enter the pattern in hexa-
decimal format
If you are transmitting a Fill Pat-
tern in an ATP payload, specify
the pattern in a hexadecimal
format up to 64 bytes long.
168.
56.
Chapter 5 TCP/UDP Testing
Configuring layer 4 traffic
"Configuring the
173