Terminal Block X1A Motor Connection; Figure 20: Terminal Block X1A Motor Connection - KEB COMBIVERT F6 Instructions For Use Manual

cONNecTION OF THe POWer UNIT

4.2.5.2 Terminal block X1A motor connection

X1A
L2 L3 + - R
L1
-
L1 L2 L3 + R
Figure 20: Terminal block X1A motor connection
ATTENTION
54
Name
U V W
U V W
U, V, W
M8 cable lugs with the following dimensions can be used for connections L1,
L2, L3, U, V, W:
• max. width of 24 mm
• max. shaft length 46 mm
• max. diameter 19 mm
M8 cable lugs with the following dimensions can be used for connections +, -,:
• max. width of 19 mm (e.g. tubular-cable-lugs by Weitkowitz Euro Series
with narrow flange).
• max. shaft length 46 mm
• max. diameter 19 mm
Alternatively to a 95 mm² line, 2 parallel 35 mm² lines can also be laid.
Short circuit due too low air and creepage distances!
► The pressing of the cable lugs must point upwards when connecting
95 mm² lines!
Terminal connec-
Function
8 mm stud for M8
Motor connection
cable lugs
Tightening
tion torque
10...15 Nm
88...132 lb inch