Product Features - KEB COMBIVERT F6 Instructions For Use Manual

PrODUcT DeScrIPTION

2.3 Product features

This instruction manual describes the power circuits of the following devices:
Unit type:
Series:
Power range:
Housing size:
The COMBIVERT F6 is characterized by the following features:
•
•
•
•
•
•
•
•
•
•
•
•
Drive converter
COMBIVERT F6
45...90 kW / 400 V
6
Operation of three-phase asynchronous motors and three-phase synchronous
motors, in operating modes open-loop or closed-loop with and without speed
feedback
following fieldbus systems are supported: EtherCAT, VARAN, PROFINET, POW-
ERLINK or CAN
Comprehensive operating concept
wide operating temperature range
low switching losses by IGBT power unit
low noise development due to high switching frequencies
Different heat sink concepts:
• Air cooler mounted version
• Air cooler as through-mount version with IP20 degree of protection
• Air cooler as through-mount version with IP54 degree of protection
• Water cooler as mounted version
• Water cooler as through-mount version with IP20 degree of protection
• water cooler as through-mount version with IP54 degree of protection
temperature-controlled fan, easily replaceable
torque limits and s-curves are adjustable to protect gearboxes
general protection functions of the COMBIVERT series against overcurrent, over-
voltage, ground fault and overtemperature
Analog inputs and outputs, digital inputs and outputs, relay output (potential-free),
brake control and -supply, motor protection by I²t, KTY- or PTC input, two encod-
er interfaces, diagnostic interface, fieldbus interface (depending on the control
board)
integrated safety function according to EN 61800-5-2
23