Table of Contents
Advertisement
BUTTON FUNCTIONS
ITEM
DESCRIPTION
UP
Push this key to increase a value. Push and hold it to increase it faster.
TMR setting range: 0:00~99:00 (Each increment: 1:00)
CAL setting range: 0.0~999.00 (Each increment: 1.0)
DOWN
Push this key to decrease a value. Push and hold it to decrease it faster.
TMR setting range: 0:00~99:00 (Each decrement: 1:00)
CAL setting range: 0.0~999.00 (Each decrement: 1.0)
MODE/ENTER
Choose each function by pressing MODE/ENTER key. In SCAN mode push it to
lock current function.
Push and hold MODE/ENTER key for 2 seconds to reset all functions besides
Total CNT.
RESET
In setting mode, push RESET key once to reset the current function figures.
Push RESET key and hold it for 2 seconds to reset all function figures.
OPERATION PROCEDURE
POWER ON: LCD displays all segments as in picture below.
POWER OFF: If the monitor has no signal within 4 minutes, it enters a sleep mode.
OPERATION
1. When you power on the monitor (or when you press and hold MODE/ENTER key for 2
seconds), the LCD display shows all segments for one second and enters the SCAN mode.
2. Without any transmitted signal into the monitor, the value of TMR, CNT, CAL and TOTAL CNT
will start to count up.
TROUBLE SHOOTING
•
If the LCD display is dim, change batteries.
•
If there is no signal during rowing, check cable connection.
NOTE:
•
Stop training for 4 minutes and the main screen gets off.
•
If the computer displays abnormally, try to re-install the battery.
12
Advertisement
Table of Contents
