Table of Contents
Advertisement
•
One micro USB 2.0-compliant port in the front of the system for iDRAC Direct
•
Two USB 3.0-compliant ports on the back of the system
NIC ports
The PowerEdge R740xd system supports up to four Network Interface Controller (NIC) ports that are integrated on the network daughter
card (NDC), and are available in the following configurations:
•
Four RJ-45 ports that support 10, 100 and 1000 Mbps
•
Four RJ-45 ports that support 100 M, 1 G and 10 Gbps
•
Four RJ-45 ports, where two ports support maximum of 10 G and the other two ports maximum of 1 G
•
Two RJ-45 ports that support up to 1 Gbps and 2 SFP+ ports that support up to 10 Gbps
•
Four SFP+ ports that support up to 10 Gbps
•
Two SFP28 ports that support up to 25 Gbps
NOTE:
You can install up to eight PCIe add-on NIC cards.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The PowerEdge R740xd system supports two
15-pin VGA ports on the front and back panels.
Serial connector
The PowerEdge R740xd system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment
(DTE), 16550-compliant.
Internal Dual SD Module or vFlash card
The PowerEdge R740xd system supports Internal Dual SD module (IDSDM) and vFlash card. In 14th generation of PowerEdge servers,
IDSDM and vFlash card are combined into a single card module, and are available in these configurations:
•
vFlash or
•
IDSDM or
•
vFlash and IDSDM
The IDSDM/vFlash card sits in the back of the system, in a Dell-proprietary slot. IDSDM/vFlash card supports three micro SD cards (two
cards for IDSDM and one card for vFlash). Micro SD cards capacity for IDSDM are 16/32/64 GB while for vFlash the microSD card
capacity is 16 GB.
Video specifications
The PowerEdge R740xd system supports integrated Matrox G200eW3 graphics controller with 16 MB of video frame buffer.
Technical specifications
31
Hide quick links:
Advertisement
Table of Contents
