Download  Print this page

Initial System Setup And Configuration; Setting Up Your System; Idrac Configuration; Options To Set Up Idrac Ip Address - Dell PowerEdge R740xd Installation And Service Manual

Hide thumbs


Setting up your system

Complete the following steps to set up your system:
Unpack the system.
Install the system into the rack. For more information about installing the system into the rack, see your Rail Installation Guide at
Connect the peripherals to the system.
Connect the system to its electrical outlet.
Turn the system on by pressing the power button or by using iDRAC.
Turn on the attached peripherals.
For more information about setting up your system, see your Getting Started Guide shipped with your system.
Related link

iDRAC configuration

Options to set up iDRAC IP address

iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators more productive and improve the overall
availability of Dell systems. iDRAC alerts administrators to system issues, helps them perform remote system management, and reduces the
need for physical access to the system.
Options to set up iDRAC IP address
You must configure the initial network settings based on your network infrastructure to enable the communication to and from iDRAC.
You must use the default iDRAC IP address to configure the initial network settings, including setting up DHCP or a static IP
for iDRAC. You can set up the IP address by using one of the following interfaces:
iDRAC Settings
See Dell Integrated Dell Remote Access Controller User's Guide at
Dell Deployment
See Dell Deployment Toolkit User's Guide at
Dell Lifecycle
See Dell Lifecycle Controller User's Guide at
Chassis or Server
See the LCD panel section
LCD panel

Initial system setup and configuration
Initial system setup and configuration


   Related Manuals for Dell PowerEdge R740xd

Comments to this Manuals

Symbols: 0
Latest comments: