Table of Contents
Advertisement
Installing integrated storage controller card
Prerequisite
Follow the safety guidelines listed in
Steps
1
Hold the interposer board by its edges, and align the interposer board connector with the connector on the system board.
2
Press the touch point on the interposer board until the interposer board connector is firmly seated on the system board connector.
3
Angle the card to engage the card with the integrated storage controller card holder on the system board.
4
Lower the card into place until the card is fully seated in the integrated storage controller card holder.
Figure 113. Installing integrated storage controller card
5
Align the screws on the integrated storage controller card cable with the screw holes on the system board.
6
Using Phillips #2 screwdriver, tighten the screws to secure the integrated storage controller card cable to the system board.
Figure 114. Installing integrated storage controller card cable
160
Installing and removing system components
Safety
instructions.
Hide quick links:
Advertisement
Table of Contents
