Dell PowerEdge R740xd Installation And Service Manual page 51

UEFI iSCSI Settings details
The UEFI iSCSI Settings screen details are explained as follows:
Option Description
iSCSI Initiator Specifies the name of the iSCSI initiator (iqn format).
Name
iSCSI Device1 Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the iSCSI device
automatically.
iSCSI Device1 Enables you to control the configuration of the iSCSI device.
Settings
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Integrated Devices.
Integrated Devices details
The Integrated Devices screen details are explained as follows:
Option Description
User Accessible Configures the user accessible USB ports. Selecting Only Back Ports On disables the front USB ports; selecting
USB Ports All Ports Off disables all front and back USB ports; selecting All Ports Off (Dynamic)All Ports On disables all front
and back USB ports during POST and front ports can be enabled or disabled dynamically by authorized user
without resetting the system.
The USB keyboard and mouse still function in certain USB ports during the boot process, depending on the
selection. After the boot process is complete, the USB ports will be enabled or disabled as per the setting.
Internal USB Port Enables or disables the internal USB port. This option is set to Enabled by default.
Integrated RAID Enables or disables the integrated RAID controller. This option is set to Enabled by default.
Controller
Integrated Network Enables or disables the integrated network card (NDC). When set to Disabled, the NDC is not available to the
Card 1 operating system (OS). This option is set to Enable by default.
Pre-operating system management applications 51