Removing The Expansion Card From Expansion Card Riser - Dell PowerEdge R740xd Installation And Service Manual

Figure 74. Closing the PCIe card holder latch
Next step
Follow the procedure listed in

Removing the expansion card from expansion card riser

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 If applicable, remove the air shroud.
4 If applicable, disconnect the cables from the expansion card.
5 When removing a card from riser 2 or 3, ensure that the PCIe card holder latch is closed.
Steps
1 Pull the expansion card latch out of the slot.
2 Hold the expansion card by its edges, and pull the card until the card edge connector disengages from the expansion card connector
on the riser.
After working inside your system.
Safety instructions.
Before working inside your system.
Installing and removing system components 129