Table of Contents
Advertisement
Steps
1
Use the hooks on the rear drive cage as guides to align the drive backplane.
2
Lower the backplane into the system until it is firmly seated.
3
Using Phillips #2 screwdriver, replace the screws to secure the backplane to the rear drive cage.
Figure 128. Installing 2.5 inch drive backplane (rear)
Next steps
1
Install all the drives.
2
Connect all the cables to the backplane.
3
Follow the procedure listed in
Related link
Installing a drive carrier
170
Installing and removing system components
After working inside your
system.
Hide quick links:
Advertisement
Table of Contents
