Installing The Right Control Panel - Dell PowerEdge R740xd Installation And Service Manual

4 Holding the control panel and cable tube by its sides, remove the control panel and cable tube away from the system.
Figure 154. Removing right control panel
Next step
Install the right control panel.
Related link
Removing the air shroud
Removing the cooling fan assembly

Installing the right control panel

Installing the right control panel
Prerequisite
Follow the safety guidelines listed in
Steps
1 Route the control panel cable and VGA cable through the side wall of the system.
2 Align the control panel with the control panel slot on the system and attach the control panel to the system.
3 Connect the VGA cable to the system board.
4 Connect the control panel cable to the system board and secure it using cable latch.
5 Using Phillips #1 screwdriver, install the screw that secures the control panel and cable tube to the system.
200 Installing and removing system components
Safety instructions.