Installing System Board - Dell PowerEdge R740xd Installation And Service Manual

Figure 149. Removing system board
Next step
Install the system board.
Related link
Removing the air shroud
Removing the cooling fan assembly
Removing mid drive tray
Removing rear drive cage
Removing a power supply unit
Removing expansion card riser 1
Removing expansion card riser 2
Removing expansion card riser 3
Removing integrated storage controller card
Removing the optional IDSDM or vFlash card
Replacing optional internal USB memory key
Removing a processor and heat sink module
Removing a memory module
Removing the network daughter card

Installing system board

Installing system board
Prerequisite
Follow the safety guidelines listed in
Steps
1 Unpack the replacement system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the chassis.
2 Holding the system board holder and blue release pin, push the system board toward the back of the system until the release pin clicks
into place.
Safety instructions.
Installing and removing system components 193