Back View Of The System; Idrac Direct Led Indicator Codes - Dell PowerEdge R740xd Installation And Service Manual

Item Indicator, button, or
connector
5 VGA port
Related link

iDRAC Direct LED indicator codes

Technical specifications
iDRAC Direct LED indicator codes
The iDRAC Direct LED indicator lights up to indicate that the port is connected and is being used as a part of the iDRAC subsystem.
iDRAC Direct LED indicator is located below the iDRAC Direct port on the right control panel.
You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. The
following table describes iDRAC Direct activity when the iDRAC Direct port is active:
Table 7. iDRAC Direct LED indicator codes
iDRAC Direct LED
indicator code
Solid green for two seconds Indicates that the laptop or tablet is connected.
Flashing green (on for two
seconds and off for two
seconds)
Turns off

Back view of the system

Figure 8. Back view of 4 x 2.5 inch drive system
Icon
Condition
Indicates that the laptop or tablet connected is recognized.
Indicates that the laptop or tablet is unplugged.
Description
Enables you to connect a display device to the system. For more
information, see the Technical specifications section.
PowerEdge R740xd system overview 15