Table of Contents
Advertisement
Figure 52. Installing a 2.5 inch drive into the 3.5 inch drive adapter
Next steps
1
Install a 3.5 inch adapter into the 3.5 inch drive carrier.
2
Follow the procedure listed in
Removing a 3.5 inch adapter from a 3.5 inch drive carrier
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the 3.5 inch drive carrier from the system.
Steps
1
Remove the screws from the rails on the drive carrier.
2
Lift the 3.5 inch drive adapter out of the drive carrier.
After working inside your
system.
Safety
instructions.
Before working inside your
system.
Installing and removing system components
103
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerEdge R740xd and is the answer not in the manual?